Services: Electrical testing and certification, environmental or chemical testing

Mandatory national standard for energy conservation and environmental protection of household appliances, to be implemented on September 1, 2026


Time:

2026-09-01

GB 44499-2024 "Code for Energy Conservation and Environmental Protection of Household and Similar Electrical Appliances" is a mandatory national standard, which will be implemented on September 1, 2026. The new standard fully introduces the concept of lifecycle management, aiming to standardize the energy-saving and environmental performance of household appliances at various stages of their lifecycle, including design, production, installation, and recycling.

GB 44499-2024 "Energy Conservation and Environmental Protection Specification for Household and Similar Electrical Appliances" mandatory national standard, implemented on September 1, 2026.

 

The new standard fully introduces the life cycle management concept, aiming to regulate the energy conservation and environmental protection performance of household electrical appliances in various stages of the life cycle, such as design, production, installation, and recycling.

 

家电节能.jpeg

 

 

 

General Provisions

 

During the design and development phase of household electrical appliances, consideration is given to the potential impacts on the environment, resources, and energy throughout the product lifecycle. Design schemes that facilitate comprehensive resource utilization and harm reduction treatment are adopted to reduce carbon emissions per unit product, minimize ecological damage, and lower resource and energy consumption.

 

In the production process of household electrical appliances, technologies, processes, equipment, and materials that have been eliminated or prohibited by relevant national departments are not used.

 

On the premise of fully protecting products, meeting safety, hygiene, and environmental requirements, and satisfying consumer needs, the packaging structure of household electrical appliances is simplified to reduce the generation of packaging waste. Priority is given to using recyclable, reusable, and easily degradable packaging materials.

 

 

 

Lifecycle stage requirements

 

01

Production phase

 

Solid waste:

It shall be disposed of by itself in accordance with the provisions of GB 18599 to achieve environmental protection purposes.

Solid waste that cannot be disposed of by itself shall be transferred to disposal enterprises with the capability and qualification, and be disposed of in accordance with the relevant provisions of GB 18599 to reduce pollution caused by solid waste.

 

Cleaning agents:

Hydrochlorofluorocarbons, 1,1,1-trichloroethane (methyl chloroform TCA), trichlorotrifluoroethane (CFC-113), and carbon tetrachloride (CTC) shall not be used as cleaning agents.

The content of volatile organic compounds (VOC) and specific volatile organic compounds shall be determined by the methods in GB 38508 and meet the limit requirements of GB 38508.

 

Persistent organic pollutants:  
The five types of persistent organic pollutants, including hexachlorobutadiene, polychlorinated naphthalenes, pentachlorophenol and its salts and esters, decabromodiphenyl ether, and short-chain chlorinated paraffins, should not be used.  
Unless otherwise specified, chemical substances that appear as unintentional trace contaminants in products are not subject to the above provisions.

 

02

Installation phase

 

Operate according to the installation and operation methods in the instruction manual of the household appliance: when the installation method, spatial location, layout, etc. may affect the energy conservation and environmental protection of the household appliance, corresponding prompts and explanations shall be provided.

03

Recycling and Reuse Stage

 

Labeling requirements: The energy-saving and environmental protection label or instructions for household appliances should include the restricted-use hazardous substances label, and the label must comply with the requirements and specified methods of SJ/T 11364, so as to facilitate consumers and recycling processors to understand the hazardous substances in the product.

 

Information provision: Producers should provide, at appropriate locations such as the product body, nameplate, and packaging, indicative instructions for recycling and disposal, as well as information on the impact of improper use or disposal on the environment and human health, so as to guide correct recycling and disposal and reduce environmental pollution risks.

 

 

 

Product Requirements

 

Energy efficiency and water efficiency: Household appliances with energy efficiency and water efficiency requirements shall be assessed for energy efficiency and water efficiency in accordance with the corresponding energy efficiency standards and water efficiency standards, and shall comply with the provisions of the corresponding energy efficiency standards and water efficiency standards. The energy efficiency standards and water efficiency standards are given in Appendix A.

 

Recyclability rate: Producers of household appliances shall calculate the recyclability rate of the product in accordance with the method specified in Appendix B.

 

Refrigerants and foaming agents: Household appliances shall not use refrigerants or foaming agents containing chlorofluorocarbons (CFCs).

Restricted substance content: For household appliances included in the "Catalogue of Electrical and Electronic Products Subject to Compliance.

 

Management for Restriction of Hazardous Substances", the content of restricted substances in electrical and electronic products shall be determined in accordance with the methods specified in GB/T 26572, and shall comply with the limit requirements specified in GB/T 26572. Household appliances exempted from the restriction of hazardous substances shall be implemented in accordance with the "List of Exceptions for the Application of Restricted Substances in the Compliance Management Catalogue".

 

 

 

 

Compliance Recommendations

 

For products produced or imported before the implementation of the standard, a transition period of 13 months will be given, starting from the 13th month after the implementation of the standard, allowing enterprises sufficient time to adjust production, improve products, and ensure the smooth implementation of the standard.

 

The release and implementation of GB 44499-2024 standard has established a unified standard for energy conservation and environmental protection in the household and similar electrical appliances industry, prompting enterprises to increase investment in energy conservation and environmental protection technology research and development, improve production processes, promote product upgrading and upgrading, improve the overall energy conservation and environmental protection level of the industry, and achieve sustainable development.

 

Jiayu Testing, as a professional third-party testing and certification service organization, has qualifications such as CMA, CNAS, CBTL, CCC, and has obtained laboratory accreditation from multiple authoritative certification institutions at home and abroad. It is equipped with advanced instruments and equipment, has a professional technical team with superb technical skills, rich industry service experience, and strong testing technology capabilities. It is proficient in various regulatory standards and specializes in providing one-stop testing and certification services for various electronic and electrical products (such as home appliances, wireless communication products, smart wearables, smart home products, information technology products, audio and video products, lighting products, spare parts products, etc.) to ensure that products meet relevant regulatory requirements. Welcome to contact us at 400-9269-886!

手机官网
手机官网

Wechat Public

Account