The new national standard for food contact silicone rubber (GB 4806.16-2025) will be enforced on September 2, 2026
Time:
2026-09-02
GB 4806.16-2025 "Silicone Rubber Materials and Products for Food Contact" will be officially implemented on September 2, 2026. This is the first independent national food safety standard specifically for silicone rubber materials in China, which puts forward comprehensive upgrading requirements for raw material control, additive list, and migration limits of silicone rubber materials.
GB 4806.16-2025 "Food Contact Silicone Rubber Materials and Articles" will be officially implemented on September 2, 2026. This is China's first independent national food safety standard specifically targeting silicone rubber materials, proposing comprehensive upgraded requirements for raw material control, additive lists, and migration limits of silicone rubber materials.
Jiayu Testing possesses the testing service capabilities for the new silicone rubber standard and can issue authoritative testing reports with legal validity, safeguarding the compliant production of food contact material enterprises. Welcome to contact us at 400-9269-886!

01
Scope of Application
Applicable to food contact silicone rubber materials and products. GB 4806.16 is a standard separately formulated by separating silicone rubber from the original rubber standards. Rubber and silicone rubber materials are managed separately, with rubber falling under the management of GB 4806.11-2023, and silicone rubber falling under the management of GB 4806.16-2025.
02
Basic Requirements
Silicone rubber materials and articles for food contact shall comply with the provisions of GB 4806.1.
03
Raw material requirements
The use of basic raw materials for silicone rubber materials and articles for food contact complies with the provisions of Appendix A and relevant announcements.
The use of additives in silicone rubber materials and articles for food contact shall comply with the provisions of GB 9685 and relevant announcements.
04
Sensory Requirements
Sensory: Normal color, no abnormal odor, foreign matter, etc.
Soaking liquid: The soaking liquid obtained from the migration test should not have deterioration in sensory properties such as discoloration, turbidity, precipitation, or abnormal odor.
05
Physical and chemical indicators
General physicochemical indicators: The general physicochemical indicators of silicone rubber materials and products for food contact shall comply with the provisions of Table 2.
Revised consumption of potassium permanganate and testing conditions for heavy metals (calculated as Pb): extended from 60°C, 0.5h to 60°C, 2h, which effectively tightens the requirements for these two indicators. It is recommended that enterprises conduct compliance testing and verification according to the new standard's testing conditions to ensure that products meet the requirements of the new standard.
Added requirements for volatile organic matter (VOM): the limit is a mass fraction ≤0.5% (or 0.5g/100g), and the specific testing method can be found in Appendix B of the standard. This indicator strengthens the control requirements for volatile matter residue in silicone rubber. VOM is a testing item where silicone rubber materials are highly prone to non-compliance, and manufacturers need to pay close attention to it.
Other physicochemical indicator requirements:
Comply with the provisions of Appendix A and relevant announcements on physicochemical indicators such as Specific Migration Limit (SML), Total Specific Migration Limit (SML(T)), and Maximum Residue Limit (QM) for the base raw materials used;
Comply with the provisions of GB 9685 and relevant announcements on physicochemical indicators such as SML, SML(T), and QM for the additives used.
06
Other technical requirements
Plastic materials and articles for food contact that use materials such as coatings, inks, and/or adhesives shall also comply with the provisions of the corresponding national food safety standards for coatings, inks, and/or adhesives.
07
Migration Test
General requirements:
Migration tests shall be performed in accordance with the provisions of GB 31604.1 and GB 5009.156, except where otherwise specified in this standard.
Special requirements:
The selection of total migration test conditions for silicone rubber materials and products with an expected food contact temperature (T) not exceeding 40 °C and a contact time (t) not exceeding 24 h shall comply with the provisions of Table 3.
Changes in test conditions:
Compared with 50% ethanol (by volume), vegetable oil as a food simulant better reflects the migration of transferable substances in silicone rubber into fatty foods; when vegetable oil is not feasible, selecting a chemical solvent for a substitute test in accordance with GB 31604.1 also better reflects the actual migration level. Enterprises should appropriately evaluate the migration in olive oil and chemical substitute reagents to verify compliance with the requirements of the new national standard.
08
Label Identifier
Label identification shall comply with the provisions of GB 4806.1.
The new national standard GB 4806.16-2025 "Silicone Rubber Materials and Products for Food Contact" will be enforced on September 2, 2026, completely replacing all the provisions related to silicone rubber in the old standard GB 4806.11-2016. This update tightens multiple indicators and adds mandatory testing items. After September 2, 2026, all newly submitted and marketed silicone rubber materials and products for food contact must comply with GB 4806.16-2025. Relevant enterprises need to conduct product evaluation and testing as soon as possible to ensure a smooth transition and guarantee product compliance and market access.
Jiayu Testing, as a professional third-party testing and certification service organization, has qualifications such as CMA, CNAS, CPSC, CCC, and has obtained laboratory accreditation from multiple authoritative certification institutions at home and abroad. It has a professional testing technology team, equipped with advanced instruments and equipment, proficient in various regulatory standards, and specializes in providing FCM food contact material testing services for various food contact materials (such as coatings, silicone rubber, plastics, metals, glass ceramic enamel, bamboo, wood, paper and cardboard) in China, the United States, the European Union and its member states (France, Italy, Germany, etc.), Japan, South Korea and other countries to ensure that your products meet the regulatory requirements of various countries. Welcome to contact us at 400-9269-886!
Related News
Wechat Public
Account
Hotline
Hotline
Follow
The Public
Follow Us
- Back