On August 12, 2026, the EU's new packaging regulation PPWR officially came into effect! Mandatory requirement for packaging heavy metal and PFAS testing
Time:
2026-08-12
The EU Packaging and Packaging Waste Regulation (PPWR), which will be enforced on August 12, 2026, controls all packaging and packaging waste, and requires all packaging to undergo heavy metal and PFAS testing, applicable to all EU member states.
The EU Packaging and Packaging Waste Regulation (PPWR) will be enforced on August 12, 2026, replacing the old packaging directive that has been in effect for nearly 30 years. Regulations control all packaging and packaging waste, establish a unified full lifecycle regulatory framework for all packaging products entering the EU market, applicable to all EU member states.
The regulations cover heavy metals PFAS、 New requirements include Declaration of Conformity (DoC), operator identification, EPR registration, and reusable packaging systems. Violating enterprises will have their goods confiscated by customs and be forcibly removed from e-commerce platforms. The maximum fine can reach 6% of the global annual revenue, and those with serious circumstances will be permanently banned from entering the EU market.

Part 01
PPWR control scope
The PPWR regulation controls packaging of all materials and in all scenarios, whether the packaging is produced in the EU or a third country, whether empty or full, and whether it originates from factories, shops, offices, or households, as long as it is placed on the EU market, it must comply.
Full coverage of types:
Sales packaging, combination packaging, transportation packaging, e-commerce packaging, takeout packaging, primary agricultural product packaging
Full material coverage:
All packaging materials such as plastic, paper, metal, glass, wood, and composite materials.
Full coverage of the main body:
Manufacturers, importers, distributors, retailers, and e-commerce platforms shall all assume corresponding obligations.
Packaging Example
Main materials: plastic bags, cardboard boxes, wooden pallets, non-woven bags, woven bags, bottles, boxes, etc;
Adhesive type: sealing tape, mesh tape, self-adhesive label, backing adhesive, etc;
Printing category: carton printing ink, bag printing patterns, color box printing surface, etc;
Coatings: film coating, film coating, varnish, UV coating, etc;
Accessories: packaging buckles, cardboard box buckles, nylon zip ties, etc;
Fillers: bubble film, pearl cotton, foam particles, inflatable bags, paper partitions, etc.
Part 02
PPWR合规要点
1
Control of Limit Values for Hazardous Substances in Packaging
Four heavy metal limits (mandatory for all packaging)
Detection limit: The total content of four heavy metals, including lead (Pb), cadmium (Cd), mercury (Hg), and hexavalent chromium (Cr (VI)), is ≤ 100 mg/kg.
Applicable objects: all packaging materials such as plastic, paper, ink, glue, coating, metal, glass, etc.
PFAS content limit (mandatory for food contact packaging)
PPWR has reached the strictest standard in history for the control of perfluorinated and polyfluoroalkyl substances (PFAS) in food contact packaging:
Single non polymer PFAS content: ≤ 25 ppb
Total non polymer PFAS content: ≤ 250 ppb
Total fluorine (F) content (including polymers): ≤ 50 ppm
If the total fluorine content exceeds 50ppm, the supplier must provide proof of the fluorine content in PFAS or non PFAS upon request.
Precautions for packaging inspection
The regulations require that each layer of homogeneous material be separated and independently tested, and it is prohibited to take the average value for mixed material testing.
Packaging such as cardboard boxes, color boxes, and plastic boxes need to be separated and tested separately for substrate, ink, film, and glue.
The substrate material and production process are completely identical, with only differences in size, and can be combined into one test.
Different materials or colors of the same material cannot be combined and must be sampled and tested separately.
The validity period of PPWR testing report is 1 year under normal circumstances; Any changes in packaging (such as packaging material, ink, supplier changes) must be retested after the change.
2
Packaging Recyclability
From August 12, 2026: Packaging must be recyclable.
By January 1, 2028: The European Commission will issue unified "Design for Recycling Guidelines," replacing the previous differing standards from over 20 countries.
From January 1, 2030: All packaging must be recyclable, and packaging placed on the market must meet at least Class C or higher; if recyclability is less than 70%, it will be deemed "technically non-recyclable" and prohibited.
From January 1, 2038: Packaging placed on the market must meet at least Class B or higher, with only Class A and B packaging allowed into the EU market.
3
Requirements for recycled content in plastic packaging
From January 1, 2030, any plastic part of packaging placed on the market must contain a certain proportion of recycled plastic, such as single-use plastic beverage bottles requiring 30% recycled plastic (calculated as an annual factory average). The European Commission will adopt a delegated act by December 31, 2026, to establish the calculation and verification methods for recycled plastic content.
4
Compostable packaging
Starting from February 12, 2028, tea and coffee filter bags and adhesive labels for fruits and vegetables must be compostable packaging.
5
Packaging minimization
Starting from January 1, 2030, manufacturers or importers must ensure that the weight and volume of packaging placed on the market are reduced to the minimum necessary level while meeting basic functions. Double layered walls, false bottoms, unnecessary packaging layers, and other packaging designs aimed at exaggerating the perceived volume of products are prohibited. The vacancy rate of combination packaging, transportation packaging, and e-commerce packaging shall not exceed 50%. All filling materials (bubble film, foam, paper scraps, etc.) are included in the empty space. The primary goal of packaging design should be to meet the basic functions of product protection, transportation, and display, avoiding excessive packaging or adding unnecessary decorative elements.
Moreover, the European Committee for Standardization (CEN) is required to revise EN 13428:2004 by February 12, 2027, to establish clear weight and capacity limits for the vast majority of common packaging in the market.
6
Reusable packaging
From January 1, 2030, transport packaging must ensure at least 40% is reusable packaging; grouped packaging must ensure at least 10% is reusable packaging; final distributors must ensure at least 10% of beverages on the market use reusable packaging.
7
Unified Packaging Label
PPWR requires clear identification of relevant economic operators. The packaging must bear the name, registered trade name or trademark, postal address, and electronic contact address of the manufacturer and (if applicable) importer. The label must be clear, non erasable, and remain readable under normal usage conditions.
On August 12, 2028, or 24 months after the implementation of the law, all packaging placed on the market must uniformly use recyclability and classification labels, indicating the material composition. The requirement for reusable packaging labels will be implemented on February 12, 2029, or 30 months after the implementation of the law.
Plastic packaging must be additionally labeled with the content of recycled and bio based plastics. Compostable packaging should indicate that the material is compostable. Packaging containing substances of concern must be marked using standardized and publicly available digital labeling techniques. Reusable packaging should be labeled and informed of its reusability.
8
Prohibition of single-use plastic packaging
Starting from January 1, 2030, the following disposable plastic packaging is prohibited from being placed on the market:
Disposable plastic packaging;
Suitable for disposable plastic packaging of pre packaged fresh fruits and vegetables weighing no more than 1.5 kilograms
Instant food and beverage packaging in hotels and restaurants;
Single package seasonings, sauces, creamers, and sugar packs;
Small disposable cosmetics and toiletries in the accommodation industry;
A very lightweight plastic tote bag
9
Extended Producer Responsibility (EPR)
All sellers offering packaged products in the EU market must complete EPR registration and fulfill related obligations separately in each sales country, with individual processing required per nation. Non-EU enterprises must appoint an EU-authorized representative to handle EPR obligations on their behalf. EPR registration numbers are not interchangeable—for example, a German registration is not recognized in France. No registration, no market entry.
10
EU Declaration of Conformity (DoC)
Manufacturers shall conduct conformity assessment according to the procedures specified in Annex VII of the regulations, prepare the technical documentation (TD), and issue the Declaration of Conformity (DoC). Importers shall ensure compliance by obtaining and verifying these documents for each shipment.
Each packaging type sold in the EU must be accompanied by a formal EU Declaration of Conformity (DoC). The DoC must be supported by technical documentation containing design specifications, test results, and recyclability assessments. The relevant documents shall be retained for 5 years (for single-use packaging) and 10 years (for reusable packaging).
Part 03
PPWR Key Compliance Time Points
2026.08.12:
Restriction of hazardous substances
Total heavy metals (lead, cadmium, mercury, hexavalent chromium) ≤100mg/kg
PFAS limits for food contact materials take effect
Packaging shall be recyclable
Export companies must complete EPR registration, issue a DoC compliance declaration, and retain a full set of technical documentation
2028.02.12:
Some packaging must be compostable
Such as tea and coffee filter bags, and adhesive labels on fruits and vegetables
2028.08.12:
Uniform packaging label requirements
Implementation of uniform label and marking requirements
2030.01.01:
Recycled plastic content requirement
The plastic part of packaging placed on the market must contain a certain proportion of recycled plastic.
Packaging minimization requirement
The weight and volume of packaging must be reduced to the minimum necessary level while fulfilling its function.
Reusable packaging targets
Transport packaging ≥40%, grouped packaging ≥10%, beverage packaging ≥10%.
Recyclability grade of at least C
All packaging placed on the market must meet at least a C-grade standard or above.
Ban on single-use plastic packaging
The use of specific types of single-use plastic packaging is prohibited.
2038.01.01:
Recyclability rating reaches Grade B
All packaging placed on the market must meet Grade B or higher standards
Part 04
PPWR Compliance Recommendations
Starting from August 12, 2026, all goods exported to Europe that do not meet the PPWR standard packaging will face risks such as customs seizure, market ban, mandatory recall, and huge fines. It is recommended that cross-border sellers take immediate action to ensure compliance.
1. Comprehensive inspection of packaging: Systematically review all products and packaging to confirm their material, structure, and harmful substance content.
2. Packaging testing: Contact Jiayu Testing to test harmful substances such as PFAS and heavy metals in the packaging, and replace excessive components.
2. Design improvement: Upgrade packaging design, enhance recyclability, meet recycled material content, advance layout of A/B level recyclability levels, and meet the 2038 threshold.
3. Supply chain management: Require suppliers to provide compliance certificates, establish a recycled material system, and ensure that the content of recycled materials meets standards.
4. Label rectification: Design packaging labels according to EU unified standards, layout digital markings (QR codes, digital traceability), and complete the update of all category labels by 2028.
5. Prepare compliance documents: Prepare technical documents (TD) and EU Declaration of Conformity (DoC) based on the testing report.
6. Compliance registration: Each sales country completes EPR registration separately, obtains a registration number, is equipped with European agents, and uploaded to the platform.
7. Data retention: Establish a retention system for compliance documents, production data, and recycled data to ensure traceability and respond to inspections by regulatory authorities.
As a professional third-party testing and certification service organization, Jiayu Testing has qualifications such as CMA, CNAS, CPSC, CCC, and has obtained laboratory accreditation from multiple authoritative certification agencies at home and abroad. The laboratory is strictly built and managed according to standards, equipped with advanced instruments and equipment, and has a skilled professional technical team with rich industry service experience and strong testing technology capabilities. It is proficient in various regulatory standards and can provide you with PPWR related compliance testing services, including but not limited to heavy metals PFAS、REACH、 Phthalates POPs、 We provide testing services for formaldehyde, VOC, and food contact materials to assist companies in actively responding to regulatory requirements, helping them achieve risk management of harmful substances, and effectively improving product compliance. Welcome to contact us 400-9269-886 !
Related News
Wechat Public
Account
Hotline
Hotline
Follow
The Public
Follow Us
- Back