Home appliance standards updated! Six national standards including GB/T 4706.1 amendment have been officially approved and released
Time:
2026-08-13
The National Standardization Administration has approved the release of three recommended national standards for household appliances, including GB/T 28205-2026 "Household and Similar Use Aquariums", and three recommended national standards for household appliances, including GB/T 4706.1-2024 "Safety of Household and Similar Use Electrical Appliances Part 1: General Requirements" (Amendment No. 1).
On July 30, 2026, the National Standardization Administration approved the publication of 323 recommended national standards, including "Marine External Thread Bronze Globe Valve", and 7 recommended national standard modification forms (National Standard Announcement of the People's Republic of China No. 33 of 2026). Three recommended national standards for household appliances, including GB/T 28205-2026 "Household and Similar Use Aquariums", and three recommended national standards for household appliances, including GB/T 4706.1-2024 "Safety of Household and Similar Use Electrical Appliances Part 1: General Requirements" (Amendment No. 1), have been approved for publication.
01
GB/T 4706.1-2024 Safety of household and similar electrical appliances - Part 1: General requirements - Amendment 1
Release date: July 30, 2026
Implementation date: July 30, 2026
Modify the content:
1、 Modification to ensure consistency with the standard document
(1) Replace the word 'remote control' in the preface with 'remote operation'.
(2) Replace 3.1.12 "Able to give instructions outside the line of sight of the instrument to achieve control, such as using communication systems, sound control, or bus systems" with "Able to initiate instructions outside the line of sight to achieve control of the instrument through remote communication, sound control, or bus systems". Replace the term 'remote control' in footnote 3.1.12 with 'remote operation'.
(3) Replace 3.2.2 "Soft wires provided as part of a complete appliance without being used for power connection, interconnecting the two parts of the appliance externally" with "Soft wires provided as part of a complete appliance without being used for connecting power supply, interconnecting the two parts of the appliance externally".
(4) Change the "instruction manual" appearing in Note 1 of 3.6.2 to "user manual".
(5) Replace 5.7 "Conduct the test in a location with an ambient temperature of 20 ℃± 5 ℃ and no ventilation" with "Conduct the test in a location with an ambient temperature of 20 ℃± 5 ℃ and no forced convection air".
(6) Replace the last paragraph of 7.6 with "Check its compliance through visual inspection and measurement" and place it after Note 4.
(7) Change the "instruction manual" appearing in 7.12 (including 7.12.1~7.12.9) and 7.13 to "user manual".
(8) Replace the first sentence of 19.11.4 with "Instruments with devices that can be electronically disconnected to obtain a closed position or devices that can be placed in standby mode shall undergo tests from 19.11.4.1 to 19.11.4.8".
(9) Replace the sentence in the third paragraph of 20.1, which reads "The appliance is placed in any normal position during use on an inclined plane at an angle of 10 ° to the horizontal plane," with "The appliance is not connected to a power source and is placed in any normal position during use on an inclined plane at an angle of 10 ° to the horizontal plane.
(10) Change the "instruction manual" appearing in 22.2 to "user manual".
(11) Change the term 'remote control' appearing in 22.40 to 'remote operation'.
(12) Change the term 'remote control' appearing in 22.49 to 'remote operation'.
(13) Change the term 'remote control' appearing in 22.50 to 'remote operation'.
(14) Change the term 'remote control' in 22.51 to 'remote operation'; Before running the appliance in remote control mode, there should be a manual adjustment control command to set the appliance to remote control mode.
(15) Replace the phrase 'user maintenance' in the first paragraph of 23.3 with 'user maintenance'.
(16) Change the term 'remote control' appearing in 24.1.7 to 'remote operation'.
(17) Replace the phrase 'multiple power sources' in 25.2 with' multiple power sources', and in the first paragraph, 'appliances should not provide more than one power connection method' with 'appliances should not provide more than one power connection method'.
(18) Replace "Multiphase appliances powered by power cords and intended to be permanently connected to fixed wiring should be connected to appliances using a Y-shaped connection" with "Multiphase appliances powered by power cords intended to be permanently connected to fixed wiring should be connected to appliances using a Y-shaped connection" in section 25.5.
(19) Replace the phrase 'user maintenance' in the fourth paragraph of 28.1 with 'user maintenance'.
(20) Change the term 'remote control' appearing in 30.2 to 'remote operation'.
(21) Replace section 7.12 in Appendix B, which states "For appliances intended to charge batteries using detachable power supply units, the instructions should provide the model number of the detachable power supply unit and the following information," with "For appliances intended to charge batteries using detachable power supply units, the instructions should provide the serial number of the detachable power supply unit and the following information; Replace section 7.15 in Appendix B, which states "The model of the detachable power supply unit should be labeled immediately after its symbol," with "The serial number of the detachable power supply unit should be labeled immediately after its symbol.
(22) Change the name of Figure O.2 from "Selection and Procedure for Heat Resistance Test of Handheld Apparatus in Figure O.2" to "Selection and Procedure for Flame Resistance Test of Handheld Apparatus in Figure O.2".
2、 Other editorial modifications
(1) Change the term 'instantaneous' in section 3.1.3 to' transient '.
(2) Change the term 3.8.3 "visible hot electric heating element" to "visible hot electric heating element".
(3) Replace the phrase "AC appliances without rated frequency or labeled with a frequency range of 50Hz~60Hz" in 5.8.1 with "AC appliances without rated frequency or labeled with a frequency range of 50Hz~60Hz".
(4) Change "115V~230V" in Note 1 of 7.3 to "115V-230V".
(5) Replace the fourth symbol in 7.6 with symbol 5032-2 (2002-10) specified in 3N~IEC60417 for three-phase AC with neutral wire
Change to "3N~IEC60417 symbol 5032-2 (2002-10) three-phase AC with neutral wire".
(6) Replace "gate" with "gate" in 19.11.2g).
(7) Change the term 'instantaneous' appearing in 19.11.4.3 to' transient '.
(8) Change the "instantaneous" appearing in 22.5 to "transient".
(9) Replace the term 'instantaneous' in Appendix K with' transient '.
(10) In Appendix L, between the boxes labeled "Maximum Applicable Value" and "Chapter 4 of GB/T16935.1-2008" on the right side of Figure L. 1 "Procedure for Measuring Electrical Clearance", add a connecting wire as shown below:
(11) Replace "additional insulation or reinforced insulation composed of thermoplastic materials" in Figure O.1 of Appendix O with "additional insulation or reinforced insulation composed of thermoplastic materials".
*If the test of 19.4 obtains Δ T through the action of a non self resetting protection device, which can only be reset after the tool is removed or the cover is removed, then Δ T is not considered.
Figure O.1 Heat resistance test
(12) Change "remote control" to "remote operation" and "visible hot electric heating element" to "visible hot electric heating element" in the index.
02
GB/T 4706.22-2024 Safety of household and similar electrical appliances Part 22: Special requirements for stationary ovens, stoves, ovens and similar appliances Amendment 1
Release date: July 30, 2026
Implementation date: July 30, 2026
Modify the content:
1.11.2 "Remove the lid that can be removed without tools during the experiment; unless the lid is removed, the stove cannot work" is changed to "Remove the lid that can be removed without tools during the experiment, unless the stove cannot work after removing the lid".
Change "oven door: 2.5kg" to "oven door: 22.5kg" in 2.20.101.
If the stove head is clamped by a nut in the middle of the bolt, an additional device is required to prevent it from rotating "in 3.22.101 is changed to" If the stove head is fixed by a nut on the central bolt, an additional device is required to prevent it from rotating ".
In section 4.22.119, the sentence "Oven stoves equipped with retractable reflectors to prevent excessive temperature of the control knob shall have a structure that makes it impossible for the user to touch the hot surface of the reflector while operating the knob" should be changed to "Oven stoves equipped with retractable baffles to prevent excessive temperature of the control knob shall have a structure that makes it impossible for the user to touch the hot surface of the baffle while operating the knob".
5. Change the title of Figure 101 from "Container for Stove Test" to "Container for Stove Test".
6. Change the title of Figure 102 from "Container for Electromagnetic Stove Test" to "Container for Electromagnetic Stove Test".
03
GB/T 19865-2024 Safety of Electric Toys - Amendment No.1
Release date: July 30, 2026
Implementation date: July 30, 2026
Modify the content:
1、 Related clauses referenced in GB6675.2 standard
(1) Chapter 2 Normative References
GB 6675.2-2014 Safety of Toys Part 2: Mechanical and Physical Properties (ISO8124-1:2000, MOD)
Revise to "GB 6675.2 Toy Safety Part 2: Mechanical and Physical Properties (GB 6675.2-2025, ISO 8124-1:2022, MOD)".
2. Delete "ISO 8124-1 Safety of toys - Part 1: Safety aspects related to mechanical and physical properties".
Note: GB/T 6675.2-2014 Safety of Toys Part 2: Mechanical and Physical Properties (ISO 8124-1:2000, MOD).
(2) Clause 5.2
Modify the "ISO 8124-1" in the terms and notes to "GB 6675.2".
(3) Clause 13.4.1
The battery that can fully accommodate the small parts tester specified in section 5.2 of GB 6675.2-2014 should not be removed without the use of tools. If the components of an electric toy containing a battery can fully fit into the small parts tester specified in section 5.2 of GB 6675.2-2014, the battery should not be accessible without the use of tools. ”
The battery that can fully accommodate the small part tester specified in GB 6675.2 should not be removed without the use of tools. If the components of an electric toy containing a battery can fully accommodate the small parts tester specified in GB 6675.2, the battery should not be accessible without the use of tools. ”
(4) Clause 13.10
The maximum speed of electric riding toys should not exceed the limit specified in 4.22 of GB 6675.2-2014. Check its compliance through the test in 5.17 of GB 6675.2-2014. ”
The maximum speed of electric riding toys should not exceed the speed limit requirements specified in GB 6675.2. Check its compliance through the speed test of electric riding toys in GB 6675.2. ”
(5) Clause 9. J.1.1
1. The braking performance should comply with the requirements of 4.20b) and 5.16.2 in GB 6675.2-2014. ”
The braking performance should meet the requirements of the braking device specified in GB 6675.2. ”
2. Confirm that the braking performance meets the requirements of 4.20b) and 5.16.2 in GB 6675.2-2014. ”
Revise to "d) Confirm that the braking performance meets the requirements of the braking device specified in GB 6675.2. ”
(6) Clause 13. J.1.1
1. The braking performance should comply with the requirements of 4.20b) and 5.16.2 in GB 6675.2-2014. ”
The braking performance should meet the requirements of the braking device specified in GB 6675.2. ”
2. Confirm that the braking performance meets the requirements of 4.20b) and 5.16.2 in GB 6675.2-2014. ”
Revise to "d) Confirm that the braking performance meets the requirements of the braking device specified in GB 6675.2. ”
2、 Examples of warning language in standards involved
1. Modify the "warning language below the age of..." in clause 7.3.2 to "age warning language similar to the following content...";
2. Modify the following warning statements in clause 7.3.3, 7.5, 7.6, Appendix A, 7.3.4, and 19.E.5 to read: "Warning statements similar to the following content...";
3. Amend clause 7. J.1.2 from "The instructions for use shall also include warnings and clear instructions" to "The instructions for use shall also include warning language and clear instructions similar to the following".
3、 Some editorial errors related to standards
1. Amend clause 13.4.4 from "shall have a battery box to prevent leakage of battery electrolyte from the electric toy" to "shall have a battery compartment to prevent leakage of battery electrolyte from the electric toy";
2. Modify clause 13.8 from "The capacitance of circuits generating voltages greater than 24V to less than or equal to 450V should be less than 0.1 μ F" to "The capacitance of circuits generating voltages greater than 24V to less than or equal to 450V should be less than 0.1 μ F".
4、 Add the following clause
Implementation of 20 standards
For products produced or imported before the implementation date of this document, it shall be implemented from the 13th month after the implementation date of this document.
04
GB/T 24986.5-2026 Reliability testing and evaluation of household and similar electrical appliances - Part 5: Special requirements for indoor heaters
Release date: July 30, 2026
Implementation date: February 1, 2027
05
GB/T 47789-2026 Performance testing methods for household and similar electric toilets
Release date: July 30, 2026
Implementation date: February 1, 2027
06
GB/T 28205-2026 Household and Similar Use Aquariums
Release date: July 30, 2026
Implementation date: February 1, 2027
Jiayu Testing, as a professional third-party testing and certification service organization, has qualifications such as CMA, CNAS, CBTL, CCC, and has obtained laboratory accreditation from multiple authoritative certification institutions at home and abroad. It is equipped with advanced instruments and equipment, has a professional technical team with superb technical skills, rich industry service experience, and strong testing technology capabilities. It is proficient in various regulatory standards and specializes in providing one-stop testing and certification services for various electronic and electrical products (such as home appliances, wireless communication products, smart wearables, smart home products, information technology products, audio and video products, lighting products, spare parts products, etc.) to ensure that products meet relevant regulatory requirements. Welcome to contact us 400-9269-886!
Related News
Wechat Public
Account
Hotline
Hotline
Follow
The Public
Follow Us
- Back