-
About JIAYU
-
-
-
Resource Center
-
News Center
-
Guidelines for CCC Version Replacement of Household Appliances (III): Interpretation of GB/T 4706.30-2024 Requirements for CCC Version Replacement of Household Appliances, Kitchen Machinery
Time：
2025-12-30
Starting from August 1, 2026, the GB/T 4706 series of 3C safety standards for household appliances will be mandatory. During the transition period, enterprises can independently choose to conduct product certification according to the new or old version standards. This article mainly focuses on the special requirements of GB/T 4706.30-2024 kitchen machinery, combined with the general requirements of GB/T 4706.1-2024, and provides a detailed interpretation of the relevant requirements for CCC version change of kitchen machinery.
The 3C safety standards for household appliances are updated! Starting from August 1, 2026, the GB/T 4706 series standards will be mandatory. During the transition period, enterprises can independently choose to conduct product certification according to the new or old version standards.
This article mainly focuses on the main content of the new standard GB/T 4706.30-2024 "Safety of household and similar electrical appliances - Part 30: Special requirements for kitchen machinery", and combines GB/T 4706.1-2024 "Safety of household and similar electrical appliances - Part 1: General requirements" to provide a detailed interpretation of the relevant requirements for the CCC version change of kitchen machinery.
Household Appliances CCC Certification National Accreditation Laboratory
Jiayu Testing is a nationally recognized laboratory for CCC certification of household appliances, and also one of the first laboratories that can issue testing reports for the replacement of 3C standards for household appliances. It can help household appliance enterprises quickly and efficiently obtain 3C certification certificates. Welcome to contact us at 400-9269-886!
GB/T 4706.30 Kitchen Machinery CCC Version Replacement Instructions
01. Scope of applicable products
This document is applicable to household and similar electric kitchen machinery with a rated voltage not exceeding 250V.
Examples of appliances include bean slicer, fruit juice extractor, mixer, can opener, centrifugal juicer, milk mixer, citrus juice extractor, coffee grinder with a funnel capacity of no more than 500g, cream mixer, egg beater, food mixer, food processor, grain grinder with a funnel capacity of no more than 3L, grinder, ice cream maker, including those used in refrigerators or freezers, sharpeners, knives, meat grinders, noodle makers, potato peelers, shredders, sifters, slicers.
(Partial product examples)
02. Version change process
Data preparation;
Submit applications online;
Sample testing;
Report review;
Certificate issuance;
Annual supervision;
03. Provide information
Certificates and all original reports;
Business license;
Explanation of Differences;
Declaration of nameplate and nameplate material;
Product manual;
List of components and non-metallic materials;
Electrical schematic diagram, etc.
04. Inspection requirements
Two main inspection models and one coverage model.
05. Certification cycle
Expected to take around 15 working days.
GB/T 4706.30 Main Technical Changes of Kitchen Machinery
01. soybean milk machine products are no longer applicable to GB/T 4706.30-2024
When the compulsory product certification is implemented for soybean milk machine products, the special standards for the old version are GB 4706.30-2008 and GB 4706.19-2008, and the special standards for the new version are GB/T 4706.19-2024.
02. The new version of the standard has revised the temperature rise limit for the "shell of electric appliances" in Table 3 of Chapter 11's temperature rise test, and refined the limit values for the "shell of electric appliances" made of different materials.
|
New version of standard electric appliance shell temperature rise |
Old version standard electric appliance shell temperature rise |
|
The casing of electric appliances (excluding handles held during normal use) ——Bare metal 48 ——Coating metal 59 ——Glass or ceramic materials 65 ——Plastic with a thickness exceeding 0.4mm 74 |
Housing of electric appliances (excluding handles held during normal use) 60 |
|
New version of GB/T 4706.30-2024 clauses/content |
Old version GB 4706.30-2008 clauses/content |
| Instruments should undergo the tests of 11.7.1 and 11.7.2, and if necessary, the test of 11.7.3. 11.7.1 The equipment shall operate according to the cycle time and corresponding number of cycles specified in 11.7.101 to 11.7.118. 11.7.2 The equipment shall be operated according to the maximum number of working cycles specified in 11.7.101 to 11.7.118 and the maximum load specified in the instructions for use. The working cycle time is as follows: - If the cycle time specified in the instructions for use does not exceed 7 minutes, the longest time specified in the instructions for use shall be increased by 1 minute or 7 minutes, whichever is shorter; ——If the cycle time specified in the instructions exceeds 7 minutes, it shall be the maximum time specified in the instructions. If a certain amount of work needs to be completed to meet the required working time, the interval time is equal to the corresponding time for emptying the container and reinstalling the container with the maximum amount of ingredients specified in the instructions. The working time of appliances equipped with timers is the maximum time allowed by the timer. 11.7.3 If the input power during the 11.7.1 and 11.7.2 tests does not meet the following conditions: - For appliances with a rated input power not exceeding 300W, the input power is greater than 80% of the rated input power; ——For appliances with a rated input power between 300W and 400W, if the input power is greater than the rated input power minus 60W; for appliances with a rated input power exceeding 400W, if the input power is greater than 85% of the rated input power, the following test shall be conducted: place the appliance in the normal use position, obtain the rated input power by applying a constant torque, and avoid bearing unbalanced forces greater than those generated during normal use. The equipment shall work according to the relevant time period specified in 11.7.101 to 11.7.118. |
The equipment works according to the prescribed cycle time. However, if the specified time exceeds the limit specified in the user manual, and if the temperature rise exceeds the limit specified in Table 3, the following tests shall be conducted according to the maximum quantity of ingredients specified in the manual: ——If the prescribed working time does not exceed 7 minutes, the working time shall be the maximum time specified in the instruction manual plus 1 minute; ——If the prescribed working time exceeds 7 minutes, the working time shall be the maximum time specified in the instruction manual. If a certain amount of work needs to be completed to meet the required working time, the interval time is equal to the time for container emptying and reloading. The working time of appliances equipped with timers is the maximum time allowed by the timer. |
05. The new version of the standard adds requirements for noodle machines with dough mixing function, and conducts a supplementary test on 19.103.
Add the maximum amount of wheat flour specified in the user manual to the noodle machine with dough mixing function, without adding water, and work for one cycle. During the trial period. 19.13 is applicable and the winding temperature cannot exceed the value specified in 19.9.
|
New version of GB/T 4706.30-2024 clauses/content |
Old version GB 4706.30-2008 clauses/content |
|
7.12 The instructions for using food processors and mixers should include warnings to prevent misuse. The instructions for use should indicate that caution should be taken when removing the cutting blade, emptying the mixing bowl, and cleaning, and should include the following: when pouring hot liquid into a food processor or mixer, caution should be taken to prevent hot steam from escaping from the container due to rapid evaporation. The instructions for using a noodle machine with dough mixing function should include the maximum amount of raw materials used. |
7.12 The instructions for using food processors and mixers should include warnings to prevent misuse. The instructions for use should indicate that care should be taken when removing the cutting blade, emptying the mixing basin, and cleaning. |
Compliance Service
As a professional third-party testing and certification service organization, Jiayu Testing has been recognized by CNAS, CMA, and CBTL. It is equipped with a skilled professional technical team, rich industry service experience, and strong testing technology capabilities. Jiayu Testing is a nationally recognized laboratory for household appliance CCC certification, and is also one of the first laboratories that can issue new 3C standard replacement testing reports for household appliances. It specializes in providing one-stop 3C certification services for various household appliance products, which can help household appliance enterprises quickly and efficiently obtain 3C certification certificates, ensuring that product quality and safety meet national standard requirements. Welcome to contact us at 400-9269-886!
Related News
Wechat Public
Account
Hotline
Hotline
Follow
The Public
Follow Us
- Back