-
About JIAYU
-
-
-
Resource Center
-
News Center
-
◉ Certification Introduction
A/C-Tick is a certification mark issued by the Australian Communications Authority (ACA) for communication equipment. Among them, C-Tick certification is suitable for electromagnetic compatibility and radio equipment, and only has mandatory requirements for EMC interference part and RF radio frequency parameter test, while A-Tick certification is suitable for telecommunication equipment.
◉ Logo
The information of the Australian supplier must be marked next to the C-Tick mark according to regulations, so that ACA can effectively trace back to the supplier responsible for the EMC of the product when sampling the product in the market. The identification of information includes four aspects:
(1) The registered name and address of the Australian supplier.
(2) Australian company registration number (Australian Company Number)
(3) The number issued by the ACA to the Australian supplier.
(4) The Australian registered trademark of the product used in the Australian market.
◉ Product Range
(1) Industrial, technological, medical (ISM) equipment, audio and video equipment;
(2) Household electrical equipment;
(3) Electric tools and electric heating appliances;
(4) lighting and similar equipment;
(5) Information technology equipment.
(6) Products that do not require application are:
(7) Devices manufactured outside Australia and not sold for import into Australia;
(8) Devices imported from New Zealand for sale in Australia and in compliance with relevant New Zealand regulations;
(9) Products that are not within the scope of application.
◉ Product Division
Australia's EMC system divides products into three levels. Suppliers must register with ACA and apply for the use of the C-Tick mark before selling level two and level three products.
Level 1 products refer to products with low interference radiation to equipment using the wireless spectrum, such as manual switches, simple relays, one-way squirrel-cage induction motors, resistors, etc. For Level 1 products, the supplier must sign a Declaration of Conformity and provide a Product Description. Level 1 products can voluntarily apply for the C-Tick mark, but after the supplier chooses to use the mark, he/she must provide the conformity declaration and the product description, and also provide the conformity record to prove that the product described in the declaration has been Complies with the relevant EMC standards. Testing location is not required, internal testing is allowed.
Level 2 products refer to products with high interference radiation to equipment using the wireless spectrum, such as switching power supplies, electric welding machines, dimmers, and most household appliances. In addition to signing the declaration of conformity and providing product descriptions, suppliers must also provide test reports according to relevant standards. If there are no relevant standards, they need to provide technical structure documents. The test site is not required, and internal testing is allowed.
Level 3 products refer to products with extremely high interference radiation to equipment using the wireless spectrum, that is, products covered by CISPR11 and CISPR22. At present, communication terminal products are still included in this scope, but from November 7, 2003, terminal products will be classified into level two products. In addition to signing the declaration of conformity and providing the product description, the supplier must also provide a test report issued by an accredited testing agency. At the same time, a quality management system certificate issued by the QSM certification body should be issued.
◉ Certification Information
(1) The full name and detailed contact address of the manufacturer of the product applying for certification and the party applying for certification.
(2) A copy of the installation and use manual of the certified product that will be provided to the user. (If the product does not yet have a user manual, a draft copy of the relevant content can be provided)
(3) The electrical schematic diagram of the product and the description of its working principle.
(4) The working oscillation frequency table of the product, the propagation path of the signal and the corresponding oscillation frequency should be listed in the table.
(5) Other product features that need to be explained. Unless otherwise specified, the above information should be provided in English. For applications of various types of products, please provide them separately.
◉ Compliance Service
As a professional third-party testing technology service organization, Jiayu Testing has qualifications such as CMA, CNAS, CBTL, CCC, and has been recognized by multiple authoritative certification agencies at home and abroad. It is equipped with advanced instruments and equipment, has a skilled professional technical team, rich industry service experience, and strong testing technology capabilities. It is proficient in various regulatory standards to ensure that products meet relevant regulatory requirements. Welcome to contact us, Jiayu Testing Consultation Hotline: 400-9269-886!
Recommended for you
Wechat Public
Account
Hotline
Hotline
Follow
The Public
Follow Us
- Back